Dynatronix Diamond 36kW Series Specifications download pdf (Page 113)

Diamond 36kW Manual Dynatronix, Inc.

198-1600-00 Rev F Page 113 of 146

B.1.8 ACK Response Command

– Sent if no data requested, otherwise the data to be sent is the ACK

@AA.a

Sync character (@) and unit address, AA = Unit ID (0 to 99; 0 is a global ID), a = Channel

Command character of command received and Command Type – 3=ack

#0,

Number of fields character and number of fields after the comma, excluding CRC

CRC

CRC value in ascii decimal

crlf

Carriage return and Line feed (0x0D 0x0A)

Example of ACK Command:

 ACK command for set setup command with no data to return from unit 24

@24.1s3#0,54321

Notes:

1. When a slave sends an ACK command it is an indication that the command was determined to be

valid and all data fields were determined to be valid and processed.

2. The slave does not send an ACK if the command was directed to the global unit address (00).

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 145 146

No comments

Dynatronix Diamond 36kW Series Specifications Page 113